In the processing of low and semi-viscous products, especialy products with low and medium viscosity such as paint, varnish, pigment paste, ink and cosmetics are widely used in areas where wet grinding and crushing is required. The role of the grinding beads in the grinding basket is great in this machine, where the dispersion and crusher work together. It saves time and material by performing both dispersion and crushing with a single machine. It is an effective machine type in which the solid particle size is reduced in the liquid to the minimum rate.

The grinding basket with superior wet grinding feature, it is designed to ensure that the product is crushed at high speed and that the product circulation passes through the basket intensively. High efficiency products switch, which is located under the grinding basket and has a contribution to dispersion, with a working impeller like a pump, it has the capability of effectively completing its operation in a short time. In the grinding basket reservoir, the heat control is effectively provided by cooling the broiler wall if necessary. All wet surfaces are made of stainless steel. The cleaning of the grinding basket and grinding beads, which is another important element, is carried out very easily by operating the product in the solvent.

Engine Power 2,2 Kw 4 Kw 15 Kw 22 Kw 30 Kw 37 Kw 55 Kw 75 Kw
Grinding Basket Volume 0,18 lt 2,1 lt 10 lt 16 lt 20 lt 30 lt 55 lt 97 lt
Suggested Filling Volume 80% 0,14 lt 1,7 lt 8 lt 13 lt 16 lt 24 lt
Suggested Filling Volume 75% 0,13 lt 1,6 lt 7,5 lt 12 lt 15 lt 22,5 lt 41,3 lt 72,5 lt
Suggested Filling Volume 70% 0,12 lt 1,5 lt 7 lt 11 lt 14 lt 21 lt 38,5 lt 68 lt

Slowly lower the grinding basket while using a low-viscosity product. The product leaking from the grinding basket is provided with grinding medium suction during milling and is spindle. The product level must reach the minimum fill level in the broiler when the basketmill is started . Do not allow the machine to run before reaching the maximum ammount

Do not let the dry dribbles dry out. Check that the grinding hopper is completely covered with product and ensure the safety of the grinding basket. If the grinding basket is dry, its surfaces will be completely heated and a dangerous ignition may result.

Mixer Machines are hight-speed mixers and shreders designed for pre-dispersion / dispersion processes in all kinds of mixing and solids in a wide range of viscosities. It is ensured that liquid products and powders are mixed homogeneously. Mixers can be manufactured with 50-1000 liters of mobile boiler, over 1000 liters fixed boiler. Depending on the demand, pneumatic system can be mixed at different levels by applying moving lid.

The mixers are also designed for the mixing of non-foaming products at high speed (50-1500 rpm). The speed setting in the paint mixers can be adjusted using the inverter.

Model Engine Power (hp) Blade Speed (rpm) Blade Diameter (mm) Broiler Kapacity (lt)
ATM 15 15-20 0-1400 250-280 600-800
ATM 22 22-30 0-1200 280-300 800-1200
ATM 30 30-40 0-1100 320-350 1200-1500
ATM 37 37-50 0-1000 350-450 1500-2000
ATM 45 45-61 0-900 450-500 2000-2400
ATM 75 75-102 0-800 600-660 3500-5000

It is multi-purpose mixer designed for various mixing processes of pharmaceutical, chemical, cosmetic and similar sectors. Sizes and strengths may vary according to the characteristics of the product to be mixed.

Model Engine Power (hp) Dispers Blade Speed (rpm) Mixer Blade Speed (rpm) Dispers Blade Diameter (mm) Mixer Blade Diameter (mm) Broiler Kapacity (lt)
H-35 33 0-230 400-500-600 300
H-50/B 49 0-220 500-600-700 500
H-60/B 60 0-170 600-700-800 650
H-100/B 102 0-135 1150 1000
H-40/II 40 0-1400 0-125 285 850 780
H-50/II 50 0-1400 0-125 285 850 780
H-60/II 60 0-1400 0-125 285 850 780
H-100/II 100 0-1400 0-150 330 1180 1250
H-125/II 136 0-1400 0-150 390 1280 1500
  • Design and manufacture according to international standards
  • AISI 304, 316-316L quality certified stainless steel material
  • Ex-proof protection feature
  • Depending on the viscosity and quantity to be filled, volumetric or load cell filling option
  • Volumetric filling machines 250 cc - 5,000 cc capacity
  • Load cell filling machines 0 kg - 30 kg capacity
  • Automatic door closing unit option
  • Movable and fixed conveyor options
  • Air pressure should be minimum 6 bars
  • The nozzle measures that can be used are ø10, ø20, ø34
  • Lower tray is adjusted according to empty box (With the shaft on the right side)
  • Weighing adjustment according to the container to be filled mechanically (0-16kg)
  • The weight setting is achieved by placing the spring arm behind the machine up or down.
  • Place the pre-prepared container under the desired weight of the nozzle
    The plus / minus tolerance is the plus or minus direction translated.
    In this way, the standard weight is set and the left button is pressed together (Both in terms of security Button is pressed).
  • Filling the container for the lid closure operation
    Arrange, put a cover on them. Couple to cover the lid
    If desired, the empty box feeding tray can be set to the head
  • The paint reservoir must always be full. This operation is carried out on the floater provides.
  • Conveyor can be added if desired.
  • Printing plate diametere: 920mm.
  • Hydraulic strke length: 1000mm.(Maximum)
  • Dosage Capacity: 4kg. -20kg. Steady infinite capacity with setting up ma.
  • Operating principle: The broiler has been fixed, the hydraulic pressure is moved downwards to allow the discharge of the product. All necessary equipments and equipments in accordance with these working principles shall be found in the machine. There are electric panels on the machine.

Painting Machine

مراجعنا